- per page
LDG AT-1000PROII Auto Antenna Tuner
FREE SHIPPING CONUS
Building on the success of the AT-1000, LDG Electronics has refined and expanded its flagship 1KW tuner, this is one awesome auto tuner!
Please CLICK HERE for a SPECIAL PACKAGE PRICE , the AT-1000PROII WITH the M-1000
LDG AT-1000PROII Auto Antenna Tuner WITH the M-1000 Meter
FREE SHIPPING CONUS
Building on the success of the AT-1000, LDG Electronics has refined and expanded its flagship 1KW tuner, this is one awesome auto tuner!
Please CLICK HERE for a SPECIAL PACKAGE PRICE , the AT-1000PROII WITH the M-1000
LDG AT-100PROII Auto Tuner
The price INCLUDES delivery in the USA
The LDG AT-100ProII is the next step in the evolution of the automatic tuner.
This desktop tuner covers all frequencies from 1.8 to 54 MHz, and will automatically match your antenna super fast!
Updated features include an LED indicator for antenna selection and an LED to indicate when in bypass.
It features a two-position antenna switch, allowing you to switch instantly between two antennas.
The AT-100ProII requires just 1 watt for operation, but will handle up to 125 watts, making it suitable for everything from QRP to a typical 100 watt transceiver.
LDG AT-600PROII Auto Antenna Tuner
The LDG AT-600 Pro2 can handle it! Time was, 100 watts was a lot of power. Today, more and more mid-sized amps with 500 watts output are becoming popular. The LDG AT-600Pro is designed for this new generation of power levels.
The AT-600Pro2 will handle up to 600 watts SSB and CW and 300 on RTTY (1.8 – 30 MHz) and 250 watts on 54 MHz. It features LDG’s state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted Vs, slopers, loops, just about anything. It will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-600Pro with longwires, random wires and antennas fed with ladder line just by adding a balun.
The AT-600Pro2 features two antenna ports on the rear panel with a front-panel indicator showing which is in use, and separate memory banks for each antenna. Easy to read LED bar-graph meters showing RF power, SWR and tuner status, tactile feedback control buttons and an LED bypass indicator complete the user interface. Any power source from 11 – 16 volts DC can be used; the AT-600Pro2 draws only 750mA during a tune cycle and much less when not tuning. Radio cables are not included (see below). The AT-600 Pro2 is shown above with the optional M-600 meter (available separately) or please CLICK HERE for a SPECIAL PACKAGE PRICE the AT-600PROII & the M-600 Meter.
* Power requirements: 11 to 16 volts DC at 750 mA Max (user supplies power source)
* Enclosure: 10.5 x 8.5 x 2.5 inches. Weight: 3 pounds.
LDG AT-600PROII Auto Antenna Tuner with M-600
The LDG AT-600 Pro2 can handle it! Time was, 100 watts was a lot of power. Today, more and more mid-sized amps with 500 watts output are becoming popular. The LDG AT-600Pro is designed for this new generation of power levels.
The AT-600Pro2 will handle up to 600 watts SSB and CW and 300 on RTTY (1.8 – 30 MHz) and 250 watts on 54 MHz. It features LDG’s state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted Vs, slopers, loops, just about anything. It will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-600Pro with longwires, random wires and antennas fed with ladder line just by adding a balun.
The AT-600Pro2 features two antenna ports on the rear panel with a front-panel indicator showing which is in use, and separate memory banks for each antenna. Easy to read LED bar-graph meters showing RF power, SWR and tuner status, tactile feedback control buttons and an LED bypass indicator complete the user interface. Any power source from 11 – 16 volts DC can be used; the AT-600Pro2 draws only 750mA during a tune cycle and much less when not tuning. Radio cables are not included (see below). The AT-600 Pro2 is shown above with the optional M-600 meter (available separately).
* Power requirements: 11 to 16 volts DC at 750 mA Max (user supplies power source)
* Enclosure: 10.5 x 8.5 x 2.5 inches. Weight: 3 pounds.
LDG FT-Meter for FT-857 and FT-897
Free Shipping in the USA
LDG FTL-Meter for FT-857(D) and FT-897(D) Free Shipping in the USA
Yaesus popular FT-857(D) and FT-897(D) transceivers are wonders of compact efficiency.
These do-anything, go-anywhere transceivers were science fiction just a few years ago, but hams today are using them in shacks, mobiles and on DXpeditions from the back yard to the top of the world.
About the only problem with these radios is that we hams who are old enough to remember when stuff like this really was science fiction are also old enough to wish that the display were just little bit bigger. Add to that a strong desire to see a real live meter needle bouncing on voice peaks, and you find yourself wishing that Yaesu had thought all this through when they designed the radio.
Well, it turns out they did. A little known feature of these radios, noticed only by compulsive manual readers, is a meter jack on the bottom of the front panel. Well, help is here! The LDG FTL-Meter is a large, easy-to-read, plug-and-play solution to all of your metering needs.
LDGs new version of its popular FTL-Meter presents a lush, highly readable 4.5 inch meter face with calibrated scales for signal strength and discriminator reading on receive, and power output, SWR, modulation, ALC action and supply voltage on transmit. Each function is selectable from the radios menu
LDG IC-PAC Icom Interface lead
The IC-PAC interface cable providing DC power and control between the radio and the autotuner.
Supported Radios:
IC-7000, IC-7200, IC-706, IC-707, IC-718, IC-725, IC-728, IC-736, IC-738, IC-746, IC-756, IC-765, and IC-775 (this interface will work with any ICOM radio that supports the ICOM AH-3 or AH-4 Tuner).
Functionality:
Pressing the tune button quickly on the radio by-passes the tuner. Pressing and holding the tune button on the radio or tuner starts the tune process.
LDG IT-100 Auto Antenna Tuner for Icom Transceivers
FREE SHIPPING CONUS
The new Icom radios are the latest amazing rig to combine all-band, all-mode DSP operation in a box smaller than some microphones come in, and with a color screen to boot! They got so much right on these fantastic rigs, you just have to wonder how they could have gone so wrong with the antenna tuner
Icoms AT-180 tuner matches an SWR of only 3:1 at most (2.5:1 on 6 meters)! This limits you to antennas that are pretty much resonant to start with; droopy dipoles and wet-noodle verticals on Field Day are out of the question with the AT-180. And, the AT-180 has only 70 memories. That;s just 7 or 8 memories per band; heck, there's more RV and county hunter nets than that, never mind DX calling frequencies and SSTV watering holes.
Once again, LDG comes to the rescue. The IT-100 is the ideal tuner for your shiny new Icom radio. First, it matches up to 10:1 SWR (3:1 on 6 meters), so just about anything you can feed with coax is good to go. And, it has 2,000 (not a typo; thats 2,000!) memories, enough for every Dxpedition, RTTY spot and radio buddy youve got, and then some. Just hit the tune button on the radio, and your IT-100 will set tuner parameters in less than a second if youve been there before. If not, it kicks off a full tuning cycle that will be over in about 3 seconds. Dont need the tuner just now? Then just tap the Tune button briefly, and the tuner goes into bypass. Press it again to bring the tuner back on line -- its just that simple.
The IT-100 is just 6.5 long, 6.5 deep and 1.5 tall. It weighs only 1.5 pounds, and gets its DC power directly from the radio; no separate power supply needed. The IT-100 works with any Icom radio that supports AH-3 or AH-4 Icom antennas. This includes the IC-7000, IC-7200, IC-706MkIIG, IC-718, IC-746, IC-756ProIII and all others that are AH-4 compatible.
The IT-100 comes fully assembled, aligned and ready to use. The package includes an Icom cable Oh, and one other thing: the LDG IT-100 costs about half as much as the AT-180. So, lets review: much wider matching range, thousands more memories and LDGs famous 2 year warranty, all at half the price. The IT-100 is clearly the tuner of choice for your Icom radio; order yours today.
LDG KT-100 Auto Tuner for Kenwood
Discounted price from Radio-Mart, an LDG Distributor.
LDG M-1000 Meter
LDG M-1000 optional external 4.5 inch LED backlit analog meter for the AT-1000ProII.
Displays forward and reverse power as well as SWR.
The tuner and the meter are independently selectable, so you could show average power on the bargraph and peak reading on the meter.
LDG RBA-1:1 Balun
The RBA-1:1 Balun Current Balun was designed to allow easy interface of ladder line antennas and long wires to the LDG line of Automatic Antenna Tuners.
The Balun operates stand alone, thus does not require an LDG Tuner.
It may be used with any of your long, random, or ladder line antenna projects.
LDG RBA-4:1 Voltage Balun
The RBA-4:1 Voltage Balun was designed to allow easy interface of ladder line antennas and long wires
to the LDG line of Automatic Antenna Tuners.
The Balun operates "stand alone", thus does not require an LDG Tuner.
It may be used with any of your long, random, or ladder line antenna projects
LDG RU-4:1 Balun, Unn!
The RU-4:1 Unun was designed to allow easy interface of LDG S9 vertical antennas to the LDG line of Automatic Antenna Tuners.
The 200 watt Unun also operates "stand alone", thus does not require an LDG Tuner for resonant verticals.
It may also be used with many of your antenna projects where a 4:1 Unun is needed.
LDG SLS-2 RJ-45 Microphone Switch, Free Shipping Conus
Now, hams have come to realize the importance of the microphone in the overall operation of their station. An SSB transmitter is little more than an audio-to-RF converter, and if its not in the mic audio, its not going to be in the transmitted RF. Many new, high quality mics have hit the market and been adopted by hams for every purpose. Wide-Band Side-Band; aficionados use commercial quality mics with elaborate equalizers to squeeze all the fidelity they can out of the available bandwidth. So, its no surprise these days to find high-end (and high-dollar) mics in the shack, or perhaps even two; one for rag-chewing and one for DX.
Switching that expensive mic between two rigs is as easy as unlatching the mic connector, shoving aside all the other cables on the desk, reaching over the cw paddle, finding the jack on the other radio, lining up the pins, making sure you have the connector lined up correctly, pressing it in and then checking to make sure the tab latched.
Hmmm…
Well, there’s a better way, and of course LDG has it. The SLS-2 is a microphone switch for modern transceivers with RJ-45 mic connectors. It features two switched and one common jack in the back; you can switch one mic between two radios, or one radio between two mics. A push-in/push-out button on the front selects the port, and an LED lights to indicate the selection. The SLS-2 runs on 12 volts DC at 100 ma from any suitable source. It makes switching radios or mics a breeze, letting you use your best mic on whichever rig you need it
LDG Y-ACC Yaesu Interface Cable
Description:
Y-ACC. 12" cable interface between radio and tuner. Does not supply DC to tuner.
Radios:
FT-857, FT-897 series (including "D" models).
Functionality:
Pressing the tune button on the tuner changes the mode of the radio to CW, tunes, then returns the radio to the previous mode.
LDG YT-100 Automatic Antenna Tuner
Yaesu radio are among the best, and LDG makes a dedicated bolt-on tuner for the FT-897, but that leaves a big chunk of the Yaesu product line with no dedicated tuner. Of course, most LDG tuners will work just fine with Yaesu radios, but it sure would be nice to have it integrated to the radio.
LDG's new YT-100 is just that. An included CAT cable interfaces with your FT857, FT897 and FT-100 (including all D models). This makes it an integrated tuner powered by the interface. No extra power cables are needed. Just press the tune button on the tuner and everything else happens automatically! The mode is set to carrier and the RF power is reduced, a tune cycle runs and the radio is returned to the original settings.
At only $169.00 DELIVERED conus, it's the perfect companion for your Yaesu radio. Order yours today!
- per page
