- per page
FT-1000MP IF Noise Reduction Mod
Here is a worthwhile mod for the FT-1000MP: a small 70 MHz IF amplifier.
It boosts the front-end gain a few dB.
The IF gain setting in menu item 9-1 is then reduced to compensate, and the radio's background hiss is greatly reduced.
The byproduct is increased sensitivity of 2-4 dB in noise floor reduction.
This is a plug-in, no-solder mod which can be easily removed.
The IF Noise Reduction mod will also work in the Mark V and Mark V Field,
Inrad # 715 filter for the FT-1000MP
INRAD #715 2.8 SSB filter for 455 kHz IF, fits Yaesu FT-1000MP, MarkV and Field, FT-847, FT-890, FT-900 and FT-1000
2.8Khz SSB filter
INRAD #103 Kenwood Filter for TS-450/690/850/950/940/930
|
400 Hz 8830 kHz CW 8-pole crystal filter
This filter is a replacement for the Kenwood YK-88C1. |
| Details | |
 |
|
| Bandwidth | 400 Hz |
| Center Frequency | 8830.0 kHz |
| Mode | CW |
| Shape Factor | 2.0 |
| Typical Insertion Loss | 250 Hz: < 9 dB; 500 Hz: < 7 dB; SSB/AM: < 6 dB |
Inrad # 718B filter for Yaesu FT-1000MP
- per page
