- per page
Kenwood YG-455C-1 500Hz CW Filter
It is the plug in type the will work in the 450, 850, 940, 950, 690 series and others.
This unit is in excellent condition and is warranted fully functional
Kenwood YK-88SN-1 SSB Narrow Filter new in the box
Kokusai Mechanical Filter MF 455ZL-21H 455Mhz
Kokusai Mechanical Filter MF 455ZU-21H 455Mhz
MFJ-1040B preselector
The MFJ-1040B preselector boosts signals from 1.8 to 54 MHz. It utilizes dual gate MOSFET, bipolar transistors for low noise and high gain.
Push-button switches provide for two receivers, two antennas, 20 dB attenuator and ON/BYPASS.
The band switch selects: 1.8-3, 3-6, 6-15 and 15-60 MHz. Controls for Delay, Gain, Band and Tune.
Unlike most preselectors, which are for receive-only, the MFJ-1040B may be used for transceiver.
It has a relay that automatically bypasses the amplifier when transmitting.
It can handle a transmit signal up to 150 watts PEP.
Rear panel jacks provide for the use of either RCA phono plugs or PL-259 connectors.
Size: 6 x 2 x 6 inches. Requires 9-12 VDC
The MFJ-784B tunable DSP audio filter
Unused in the box, an excellent DSP filter, turn your old radio's audio in to a modern rig type performance.
Motorola MT-3 10.7MHz generator
This was part of a package we collected recently, sold as is, untested.
Murata CFM455K D Filter for IC-735
SignalLink SL-1 Sound Card - Radio Interface
Supplied with the Power Supply and leads as shown, The Lead is wired for a Kenwood.
- No Serial or USB Port Required
- Complete Radio Isolation
- Adjustable Rx & Tx Levels
- Variable Transmit Delay
- Works with ALL Radios
- Uses Mic, Data, or Accy Port
-
Supports All Available Digital
and Voice Modes
This is an advanced Sound Card to Radio interface
For full specs PLEASE CLICK HERE
Timewave DSP-9 Filter
The DSP-9 uses digital signal processing technology to provide optimum filters for random noise reduction, heterodyne elimination and bandpass filtering. Digital Signal Processing (DSP) technology provides superior performance in reducing QRM and QRN.
Tests perfect, Supplied as shown with the manual.
Yaesu FM-747 FM Module
The Yaesu FM-747 can be installed in the FT-840 to permit narrow-band FM reception and transmission, as used within the 10 meter (29 MHz) amateur band for simplex and repeater operation.
Inrad # 718B filter for Yaesu FT-1000MP
Yaesu XF-110CN Filter
455 kHz CW 250 Hz Filter
Fits Yaesu FT-1000 series
Yaesu XF-110SN 2.0KHz Narrow SSB Filter
Yaesu YF-114CN 250hz CW filter
Filter for 2nd IF (FT-1000MP MARK-V, FT-1000MP MARK-V FIELD)
YAESU XF114SN 2KHz SSB Narrow Filter
Yaesu XF-115C Collins 455KHz 500Hz CW filter
- per page
